ICS Cutting Tools

ANGLE CUTTERS
Angle Cutters can be used on manual or CNC machining centers. They are ground for cutting steel.
 
Single Angle (Shank) Cutters
High Speed Steel Single Angle Cutters are designed for chamfering or beveling parts, e.g., a 60 degree cutter can be used to mill a 30 degree angle. They can be used on manual or CNC machining centers. They are ground for cutting steel.
ITEM NO.     CUTTER DIA. CUTTER WIDTH SHANK DIA. OVERALL LENGTH
45 degree
SASC 45-032    1/2    1/8    3/8    2-1/8   
SASC 45-048    3/4    3/16    3/8    2-1/8   
SASC 45-100    1    5/16    1/2    2-1/2   
SASC 45-132    1-1/2    1/2    3/4    2-3/4   
60 degree
SASC 60-032    1/2    7/32    3/8    2-1/8   
SASC 60-048    3/4    5/16    3/8    2-1/8   
SASC 60-100    1    7/16    1/2    2-1/2   
SASC 60-132    1-1/2    5/8    3/4    2-3/4   
Double Angle (Shank) Cutters
High Speed Steel Double Angle Cutters are designed for milling threads, V-grooves, serrations, and other angular surfaces. These cutters can mill a double angle cut in one pass and can be used on manual or CNC machining centers. They are ground for cutting steel.
ITEM NO.     CUTTER DIA. CUTTER WIDTH SHANK DIA. OVERALL LENGTH
60 degree
DASC 60-048    3/4    3/16    3/8    2-3/8   
DASC 60-100    1    5/16    1/2    2-27/32   
DASC 60-124    1-3/8    7/16    5/8    3-7/32   
DASC 60-132    1-1/2    1/2    5/8    3-3/8   
DASC 60-156    1-7/8    5/8    3/4    3-25/32   
DASC 60-216    2-1/4    3/4    7/8    4-5/32   
DASC 60-216A    2-1/4    1/2    3/4    3-1/8   
90 degree
DASC 90-048    3/4    1/4    3/8    2-7/16   
DASC 90-100    1    3/8    1/2    2-29/32   
DASC 90-124    1-3/8    1/2    5/8    3-9/32   
DASC 90-132    1-1/2    9/16    5/8    3-7/16   
DASC 90-156    1-7/8    5/8    3/4    3-25/32   
DASC 90-216    2-1/4    3/4    7/8    4-5/32   
DASC 90-216A    2-1/4    1/2    3/4    3-1/8   
 

Copyright © 1994-2012 by ICS Cutting Tools, Inc. All rights reserved. No part of this page may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic or digital recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use without written permission of the publisher.