ICS Diamond Saw Blades can be used to cut a variety of
materials and shapes. The proper blade will provide maximum
blade life and high cutting efficiency. Selection depends
on several considerations. |
|
| |
DRY
CUTTING DIAMOND SAW BLADES
- Cured
Concrete Blade
- Recommended for cutting
cured concrete, brick, and non-abrasive materials. General
purpose, soft to medium aggregate.
- Asphalt
& Green Concrete Blade
- Recommended for cutting
asphalt and soft green concrete. General
purpose, medium aggregate asphalt.
- Brick
& Block Blade
- Recommended for cutting regular brick and concrete
light weight block.
- Block
Blade
- Recommended for cutting concrete light weight
block, soft brick, and limestone.
- Tuck
Pointing Blade
- Recommended for routing
old mortar between brick and block joints. Can
be used on circular saws or angle grinders.
- Segmented
Turbo Blade
- Recommended for cutting hard aggregates and hard
masonry materials.
- Turbo
Blade
- Recommended for cutting concrete, brick, and paving
stones.
- Small
Diameter Segmented Blade
- Recommended for cutting concrete, brick, stone,
and hard materials.
- Continuous
Rim Tile Blade
- Recommended for cutting ceramic tile, slate, glazed
tile, and marble.
- Small
Diameter Laser Welded Blade
- Recommended for cutting concrete, brick, and other
hard materials.
WET
CUTTING DIAMOND SAW BLADES- Cured
Concrete Blade
- Recommended for cutting cured and reinforced concrete,
general purpose, all aggregates.
- Asphalt
& Green Concrete Blade
- Recommended for cutting asphalt, green concrete,
and hard aggregate asphalt.
- Asphalt
Over Concrete Blade
- Recommended for cutting asphalt over concrete,
abrasive asphalt, and very hard aggregate asphalt.
|
|
| |
GENERAL
Home
| Search | Contact
| About ICS | Press
Releases | Contact | Online
Ordering
PRODUCTS
Drills-Metal
Cutting | Masonry Drills
and Tools | Wood Boring Tools
| Counterbores, Countersinks
and Reamers
Taps, Dies and Screw Extractors
| End Mills and Milling
Cutters | Boring Bars,
Inserts and Tool Bits
Saw Blades and Hole Saws
| Files and Burs
REFERENCE
High
Speed Steel Tool Data Sheet | Surface
Treatment Info | Material Safety
Data Sheet
Copyright
© 1994-2008 by ICS Cutting Tools, Inc. All rights reserved.
No part of this page may be reproduced by any mechanical, photographic,
or electronic process, or in the form of a phonographic or
digital recording, nor may it be stored in a retrieval system,
transmitted, or otherwise copied for public or private use
without written permission of the publisher.
|
|
