ICS Cutting Tools - forstner bits

FORSTNER BITS

Forstner Bits
Forstner bits are designed for intricate woodworking. Used to drill flat bottom or through holes. Can bore any arc of a circle. Bit is guided by circular rim instead of center. Will cut satin smooth without deflection by grain or knots. Forstner bits are available machine ground to size from High Carbon Steel stock. Sizes 2-1/4 and over have multi-spur cutting edge.

SIZE	OVERALL LENGTH	SHANK
1/4	4	3/8
5/16	4	3/8
3/8	4	3/8
7/16	4	3/8
1/2	4	3/8
9/16	4	3/8
5/8	4	3/8
11/16	4	3/8
3/4	4	3/8
13/16	4	3/8
7/8	4	3/8
15/16	4	3/8
1	4	3/8
1-1/8	4	3/8
1-1/4	4	3/8
1-5/16	4	3/8
1-3/8	4	3/8
1-1/2	4	3/8
1-9/16	4	3/8
1-5/8	4	3/8
1-3/4	3-1/2	3/8
1-7/8	3-1/2	3/8

SIZE	OVERALL LENGTH	SHANK
1-15/16	3-1/2	3/8
2	3-1/2	3/8
2-1/8	4	3/8
2-1/4	6	1/2
2-3/8	6	1/2
2-1/2	6	1/2
2-5/8	6	1/2
2-3/4	6	1/2
2-7/8	6	1/2
3	6	1/2
3-1/8	6	1/2
3-1/4	6	1/2
3-1/2	6	1/2
3-9/16	6	1/2
3-5/8	6	1/2
3-11/16	6	1/2
3-3/4	6	1/2
3-7/8	6	1/2
METRIC EUROPEAN HINGE SIZES
26mm	4	3/8
35mm	4	3/8
40mm	4	3/8

Forstner Bit Sets
Forstner Bit Sets are available in the following quantities:

7pc - 1/4 to 1 by 8ths
16pc - 1/4 to 2-1/8 by 8ths
24pc - 1/4 to 3-1/8 by 8ths
31pc - 1/4 to 2-1/8 by 16ths
8pc - 2-1/4 to 3-1/8 by 8ths

Copyright © 1994-2012 by ICS Cutting Tools, Inc. All rights reserved. No part of this page may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic or digital recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use without written permission of the publisher.