Homecontactsearchproductsorderaboutreference
ICS Cutting Tools

HACK SAW BLADES

hack saw blade

ICS hand hack saw blades can be used to cut a variety of materials and shapes. The proper blade will provide maximum blade life and high cutting efficiency. Selection depends on several considerations.

TEETH PER INCH

14 TOOTH BLADE - COARSE - 1" OR GREATER CROSS SECTION CUTTING
18 TOOTH BLADE - MEDIUM - 1/4" TO 1" CROSS SECTION CUTTING
24 TOOTH BLADE - FINE - SHEET METAL CUTTING AND TUBING
32 TOOTH BLADE - VERY FINE - UP TO 1/16" THICKNESS CUTTING

TOOTH SELECTION: Selecting a blade with the correct number of teeth is dependent on the thickness and type of material to be cut. The teeth must never straddle the material and at least 3 teeth must always be in contact. For thin sections the highest number of teeth should be selected.

 

    HACK SAW BLADES

    ·High Speed Steel Flexible Hack Saw Blades
    Flexible Molybdenum High Speed Steel Blades are double heat treated to provide a hard cutting edge on the teeth and a flexible, shatter resistant back. Used where accuracy and high cutting rates are required. Recommended when work cannot be firmly secured. Ideal for specialized sawing of tool steel, alloy steel, and other tough materials.
    ·Bi-Metal High Speed Steel Hack Saw Blades
    Bi-Metal Blades have a Molybdenum High Speed Steel cutting edge electronically welded to a tough alloy spring steel back. The full tooth hardness combined with a flexible back provides the highest possible cutting efficiency. Shatterproof blades may twice as long as other HSS blades. Ideal for cutting stainless, pipe, conduit - almost any material.
    ·Carbide Grit Edged High Speed Steel Hack Saw Blades
    Carbide grit edged hacksaw blades are extra-wide to help maintain a straight cut and to cut very difficult work: Thin gauge stainless steel, perforated metal, wire rope. Cuts in both directions. Self sharpening. Fits all standard hacksaw frames.
    ·Power Hack Saw Blades
    All Hard Molybdenum High Speed Steel Blades are fully heat treated throughout for rigidity and exceptional blade life. The all hard feature assures straight cuts and gives excellent result on tough materials.

    HACK SAW FRAMES

    ·Hack Saw Frames
    ICS Hack Saws are available in a variety of styles for all hand metal cutting needs.   Each Hack Saw is designed for a specific cutting application.  The description below will assist the user in selecting the Hack Saw needed for their particular application.
 

GENERAL
Home | Search | Contact | About ICS | Press Releases | Contact | Online Ordering
PRODUCTS

Drills-Metal Cutting | Masonry Drills and Tools | Wood Boring Tools | Counterbores, Countersinks and Reamers
Taps, Dies and Screw Extractors | End Mills and Milling Cutters | Boring Bars, Inserts and Tool Bits
Saw Blades and Hole Saws | Files and Burs

REFERENCE
High Speed Steel Tool Data Sheet | Surface Treatment Info | Material Safety Data Sheet

Copyright © 1994-2008 by ICS Cutting Tools, Inc. All rights reserved. No part of this page may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic or digital recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use without written permission of the publisher.