Homecontactsearchproductsorderaboutreference
ICS Cutting Tools

MILLING MACHINE ADAPTERS

These are designed to mill shanks.
 
spacer

R8 To Morse Taper Milling Machine Adapters
 R-8 To Morse Taper Milling Machine Adapters are designed to adapt cutting tools with a Morse Taper Shank to an R-8 Shank. All adapters are hardened and precision ground to ensure accurate size and concentricity.
spacer
ITEM NO. (OUTSIDE) SHANK TYPE (INSIDE) SHANK TYPE DRAW BAR THREAD SIZE
MMA-R8M2 R-8 MT2 7/16-20
MMA-R8M3 MT3
spacer

NMTB To Morse Taper Milling Machine Adapters
 NMTB To Morse Taper Milling Machine Adapters are designed to adapt cutting tools with a Morse Taper Shank to an National Standard Taper Shank. All adapters are hardened and precision ground to ensure accurate size and concentricity.
spacer
ITEM NO. (OUTSIDE) SHANK TYPE (INSIDE) SHANK TYPE DRAW BAR THREAD SIZE
MMA-NST40MT2 NST 40 MT2 5/8-11
MMA-NST40MT3 MT3
MMA-NST40MT4 MT4
MMA-NST40MT5 MT5
MMA-NST50MT2 NST 50 MT2 1-8
MMA-NST50MT3 MT3
MMA-NST50MT4 MT4
MMA-NST50MT5 MT5
spacer

NMTB To R-8 Milling Machine Adapters
NMTB To R-8 Milling Machine Adapters are designed to adapt cutting tools with a NMTB Shank to an R-8 shank. All adapters are hardened and precision ground to ensure accurate size and concentricity.
spacer
ITEM NO. (OUTSIDE) SHANK TYPE (INSIDE) SHANK TYPE DRAW BAR THREAD SIZE
MMA-NST40R8 NST 40 R8 5/8-11
MMA-NST50R8 NST 50 R8 1-8
 

Copyright © 1994-2009 by ICS Cutting Tools, Inc. All rights reserved. No part of this page may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic or digital recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use without written permission of the publisher.