Homecontactsearchproductsorderaboutreference
ICS Cutting Tools

PILOT DRILLS

Pilot Drills are designed to fit all styles of hole saws. They are primarily used to allow depth adjustment for hole saws.
 
spacer

Pilot Drill - Three Steps
Three Step 1/4" Pilot Drills are designed to fit all styles of hole saws. Steps are ground into the shank to allow adjustment for different depth hole saws.
spacer
ITEM NO. SIZE (DIA. x LENGTH) DRILL POINT DESCRIPTION UNIT PKG.
HSPD-3S 1/4 x 4 118° Point 3 Ground Steps on Shank for Set Screws 10/12
HSPD-3SH 1/4 x 4 135° Split Point 3 Ground Steps on Shank for Set Screws 10/12
spacer

Pilot Drill - Three Flats
Three Flat 1/4" Pilot Drills are designed to fit all styles of hole saws. Flats are ground on three sides to prevent drill from slipping in chuck and to allow depth adjustment.
spacer
ITEM NO. SIZE (DIA. x LENGTH) DRILL POINT DESCRIPTION UNIT PKG.
HSPD-3F 1/4 x 4 118° Point 3 Ground Flats on Shank (3 Sides) 10/12
HSPD-3FH 1/4 x 4 135° Split Point 3 Ground Flats on Shank (3 Sides) 10/12
 

Copyright © 1994-2009 by ICS Cutting Tools, Inc. All rights reserved. No part of this page may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic or digital recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use without written permission of the publisher.