|
 |
A Tungsten Carbide cutting edge is permanently
bonded to a high quality blank, these blades can often outperform abrasive
wheels, diamonds, and TCT blades. This blade is reversible so when
it gets dull in one direction, just turn it around for up to 20% more
cutting life. Blades will not shatter or lose diameter and width as
they work. Do Not use for Masonry, Wood, and most metals. Do use for
all types of Fiberglass, Fiber Reinforced Cement, Composition Board,
Frictional Materials, Hardwood flooring, Plywood, Plastic laminates,
Plaster with Lath, Sheet Steel (to 16ga.). Insulated steel panels,
and Tempered Hardboard. Blades, fit most portable, bench, and radial
arm saws. |
|
|
|
| |
CIRCULAR SAW BLADES
|
Circular
Saw Blades - Carbide Tipped
ICS Carbide Tipped Circular Saw Blades are designed for heavy duty construction
work. They are manufactured with genuine Tungsten Carbide Tips and will last
up to 60 times longer than steel blades. Blades are precision balanced and have
sharp cutting edges for fast, smooth cuts. |
|
|
| ITEM NO. |
DIAMETER |
NO. OF TEETH |
ARBOR |
| CTCB-SK-06512 |
6-1/2 |
12 |
5/8 UNIV |
| CTCB-SK-06512 |
6-1/2 |
20 |
5/8 UNIV |
| CTCB-SK-0716 |
7-1/4 |
16 |
5/8 UNIV |
| CTCB-SK-0720 |
7-1/4 |
20 |
5/8 UNIV |
| CTCB-SK-0724 |
7-1/4 |
24 |
5/8 UNIV |
| CTCB-SK-0740 |
7-1/4 |
40 |
5/8 UNIV |
| CTCB-SK-0824 |
8-1/4 |
24 |
5/8 |
| CTCB-SK-0840 |
8-1/4 |
40 |
5/8 |
| CTCB-SK-1028 |
10 |
28 |
5/8 |
| CTCB-SK-1040 |
10 |
40 |
5/8 |
| CTCB-SK-1060 |
10 |
60 |
5/8 |
| CTCB-SK-1260 |
12 |
60 |
1" |
ABRASIVE CUT-OFF WHEELS
|
Abrasive Cut-Off Wheels - Metal Cutting
Metal Cutting Abrasive Cut-Off Wheels are designed for use with electric circular
saws to cut most ferrous metals, e.g., structural steel, sheet metal, etc. |
|
|
| ITEM NO. |
DIA. x THICKNESS x ARBOR |
MAX R.P.M. |
| ACW-M-632 |
6-1/2 x 3/32 x ◊-5/8 |
8600 |
| ACW-M-700 |
7 x 3/32 x ◊-5/8 |
8600 |
| ACW-M-800 |
8 x 3/32 x ◊-5/8 |
7500 |
|
Abrasive
Cut-Off Wheels - Masonry Cutting
Masonry Cutting Abrasive Cut-Off Wheels are designed for use with electric circular
saws to cut most masonry materials, e.g., concrete, masonry, brick, block, stone,
aluminum, non-ferrous metals. |
|
|
| ITEM NO. |
DIA. x THICKNESS x ARBOR |
MAX R.P.M. |
| ACW-MAS-632 |
6-1/2 x 1/8 x ◊-5/8 |
8600 |
| ACW-MAS-700 |
7 x 1/8 x ◊-5/8 |
8600 |
| ACW-MAS-800 |
8 x 1/8 x ◊-5/8 |
7500 |
|
|
| |
|
Copyright
© 1994-2009 by ICS Cutting Tools, Inc. All rights reserved.
No part of this page may be reproduced by any mechanical, photographic,
or electronic process, or in the form of a phonographic or
digital recording, nor may it be stored in a retrieval system,
transmitted, or otherwise copied for public or private use
without written permission of the publisher.
|
|
