Electric Hammer Chisels
ICS Electric Hammer Chisels are available in a variety of shank styles. The SHANK STYLES section will assist the hammer drill user in making a selection for their specific application.
    ELECTRIC HAMMER CHISELS
Electric Hammer Chisel - Bull (Moil) Point
Electric Hammer Bull Point Chisels are designed for light demolition work and starting holes in concrete slabs, brick, mortar, slate etc... They are also known as Electric Hammer Moil Point Chisels.
Electric Hammer Chisel - Flat (Cold) Chisel
Electric Hammer Flat Chisels are designed for edging, chipping, scaling or channeling concrete, masonry or brick. They are also known as Electric Hammer Cold Chisels.
Electric Hammer Chisel - Scaling Chisel
Electric Hammer Scaling Chisels are designed for removing scale, rust, concrete and weld spatter. They are also known as Electric Hammer Wide Chisels.
Electric Hammer Chisel - Slotting Tool
Electric Hammer Slotting Chisels are designed for slotting and cutting web between drilled holes in concrete to make larger openings. Alternately known as an Electric Hammer Slotting Tool.
Electric Hammer Chisel - Mortar (Seam) Tool
Electric Hammer Mortar Chisels are for removing old mortar between bricks before tuck pointing or caulking. They can also be used to cut narrow channels or to remove bricks in wall for installing insulation. They are also known as Electric Hammer Seam Chisels or Brick Removing Chisels.
Electric Hammer Chisel - Clay Spade
Electric Hammer Clay Spade Chisels are designed for digging out clay, hard packed gravel, dirt, shale etc... They are primarily used for landscaping and are not for use in concrete.
Electric Hammer Chisel - Asphalt Cutter
Electric Hammer Asphalt Cutter Chisels are designed for cutting or breaking up asphalt or hard ground. They are primarily used for road maintenance and are not for use in concrete. They are also known as Tarmac Chisels.
Electric Hammer Chisel - Ground Rod Driver
Electric Hammer Ground Rod Drivers are designed for driving 5/8” or 3/4” electrical grounding rods into earth near the edge of structure foundation or for installing parking bumpers.

SHANK STYLES

Electric Hammer Chisel Shank Style - Spline - 5/8" Round
Spline Shank Electric Hammer Chisels fit all makes of Spline Drive Hammers. The butt end of shank is designed to by-pass spline in hammer to prevent rotation during use.

Electric Hammer Chisel Shank Style - SDS-Plus
SDS-Plus Shank Electric Hammer Chisels fit all popular 4 slot power tools. Operator simply moves selector switch to percussion only modes to use.

Electric Hammer Chisel Shank Style - Bosch - SDS-Max
Bosch SDS-Max Shank Electric Hammer Chisesl fis directly into new Bosch SDS-MAX Hammers and Hilti Hammers with large 2 slot bit locking systems.

Electric Hammer Chisel Shank Style - Hex - Demolition
Hex-Demolition Shank Electric Hammer Chisesl fit Bosch Models 11302 and 11305.

Electric Hammer Chisel Shank Style - Hex - Breaker
Hex-Breaker Shank Electric Hammer Chisels fit Bosch Model 11304.
BUSHING TOOLS
Electric Hammer Chisel - Bushing Tool - 1 Piece Tool
The 1 Piece Electric Hammer Bushing Tool is a solid forged hammer chisel designed for roughing up concrete and asphalt prior to resurfacing. May be used to produce a rough exterior finish.
Electric Hammer Chisel - Bushing Tool - 2 Piece Tool Kit
The 2 Piece Electric Hammer Bushing Tool has a replaceable tool head and tool shank. It is designed for roughing up concrete and asphalt prior to resurfacing. It may also be used to produce a rough exterior finish.
Electric Hammer Chisel - Bushing Tool Heads
Electric Hammer Bushing Tool Heads are designed to fit any style bushing tool shank or stem, They are also known as Bushing Hammer Tools. 16 point head - 1-1/2 x 1-1/2 square.
Electric Hammer Chisel - Bushing Tool Shanks (Stems)
Electric Hammer Bushing Tools Shanks are designed to fit all Spline, SDS-MAX, or 3/4” Hex Drive Hammer Drills. They are also known as Electric Hammer Bushing Tool Stems or Bushing Drivers.