A-TAPER
page 154
Designed to fit into "A" taper chuck adapters which allow "A" taper shank masonry hammer bits to be used with almost any current or discontinued model hammer drill.
B-TAPER
page 154
Designed to fit into "B" taper chuck adapter which allow "B" taper shank masonry hammer bits to be used with almost any current or discontinued model hammer drill.
BOSCH SDS
page 147
Designed for use with all rotary hammers that specify SDS-Plus shank hammer drills.
BOSCH SDS - HEX TAPCON
page 146
Designed for use in Tapcon®, Condrive®, and Black and Decker® drilling systems for setting masonry anchor screws with self-cutting threads.
BOSCH SDS - MAX-SINGLE CUTTER
page 150
Designed for use with large SDS-MAX drive rotary hammers. Single cutting edge.
BOSCH SDS - MAXX-MULTI CUTTER
page 151
Designed for use with large SDS-MAX drive rotary hammers. 4 cross cutting edges pulverize the material to be drilled better and more quickly than single edge hammer bits.
BOSCH SPLINE
page 159
Designed for use with spline-drive rotary hammers. Single cutting edge.
BOSCH SPLINE - CROSSHEAD
page 153
Designed for use with spline-drive rotary hammers. 4 cross cutting edges pulverize the material to be drilled better and more quickly than single edge hammer bits.
CARPET STUBBY
page 144
Designed to fit Yankee Push Drill systems where 3/16" and 1/4" anchor holes are required.
CORE - DIAMOND
page 139A
Used for cutting miscellaneous types of concrete, masonry, and stone.
CORE - HAMMER
page 141
Designed to drill large diameter holes with most rotary hammer drills.
CORE - REBAR CUTTER
page 138
Designed with a multi-tooth cutter head for drilling through concrete and embedded rebar or wire mesh.
CORE - ROTARY
page 139
Designed for drilling large diameter holes in thin or brittle material
that would be damaged if done with a hammer core drill.
CORE - THIN WALL
page 140
Designed to drill large diameter holes with most rotary hammer drills.
FAST SPIRAL
page 142
Designed for rotary drilling into brick, cinder block, tile, plaster, and other brittle materials.
HAMMER
Hammer Drills page
METRIC
page 144
Metric Diameter Drills must be used for drilling metric size anchor holes to ensure proper fit for metric size anchors.
REBAR CUTTER
page 138
Designed with a multi-tooth cutter head for drilling through concrete and embedded rebar or wire mesh.
TAPCON - TANG
page 146
for use in Tapcon®, Condrive®, and Black and Decker® drilling systems for setting masonry anchor screws with self-cutting threads.
UNIVERSAL
page 136
Highly effective for drilling hard metals and alloys, reinforced concrete, stone, tile, ceramics, marble, granite, glass, hard and soft woods, plastics and many other difficult materials.
WIDE SPIRAL
page 143
For rotary drilling into concrete, masonry, marble, stone and rock. The wide spiral flute design is very strong and removes debris rapidly.
WIDE SPIRAL - METRIC
page 144
YANKEE (PUSH)
page 144
Designed to fit Yankee Push Drill systems where 3/16" and 1/4" anchor holes are required.
They are ideal for drywall and concrete block.