ICS Cutting Tools - silver and deming drills

SILVER AND DEMING DRILLS

silver and deming drill - side and front view

Silver & Deming drills are all purpose drills and are used wherever the maximum chuck capacity is 1/2". They are also called Blacksmith Drills or Prentice Drills (Canada). All S&D Drills are 6" overall length with 3" flute length.

SILVER AND DEMING DRILLS - FRACTIONAL
S&D Drill - Round Shank - 118° Pt: For portable or machine drilling in ferrous or non-ferrous metals. Ground oxide finish flutes retain lubricants and ease chip welding when drilling cast iron, steel, etc.
S&D Drill - 3 Flat Shank - 118° Pt: Flats are ground on three sides of drill shank for positive holding in 3-Jaw Chucks.
S&D Drill - Tin Coated Round Shank - 118° Pt: Titanium nitride coated Silver & Deming drills will drill 200 to 700% more holes than uncoated tools.
S&D Drill - Heavy Duty - 135° Split Point: For portable or machine drilling in hard steels, stainless steels, and other hard materials. The split point is self centering and breaks up chips. Sizes over 1" are 118° split point.
S&D Drill - Heavy Duty - 3 Flat Shank - 135° Split Point: For portable or machine drilling in hard steels, stainless steels, and other hard materials. The split point is self centering and breaks up chips. Sizes over 1" are 118° split point. Flats are ground on three sides of drill shank for positive holding in 3 Jaw Chucks.
S&D Drill - Heavy Duty - 118° Split Point: For portable or machine drilling in mild steels, aluminum, and magnesium alloys. Mfr. to NAS 907-A specs.
S&D Drill - Heavy Duty - Cobalt Coated - 135° Split Point: For portable or machine drilling in stainless steels, titanium, and other work hardening metals. The split point is self centering and breaks up chips. Sizes over 1" are 118° split point.
S&D Drill - Heavy Duty - Cobalt Coated - 3 Flat Shank - 135° Split Point: For portable or machine drilling in stainless steels, titanium, and other work hardening metals. The split point is self centering and breaks up chips. Sizes over 1" are 118° split point. Flats are ground on three sides of drill shank for positive holding in 3 Jaw Chucks.
S&D Drill - 1/2" Shank Jumbo - 118° Pt: For portable or machine drilling in ferrous or non-ferrous metals. Ground oxide finish flutes retain lubricants and ease chip welding when drilling cast iron, steel, etc. All sizes 6" overall length with 3" flute length.
S&D Drill - 3/4" Shank - 118° Pt: For portable or machine drilling in ferrous or non-ferrous metals. Ground oxide finish flutes retain lubricants and ease chip welding when drilling cast iron, steel, etc. All sizes 6" overall length with 3" flute length.
S&D Drill - 3/8" Shank - 118° Pt: For portable or machine drilling in ferrous or non-ferrous metals. Ground oxide finish flutes retain lubricants and ease chip welding when drilling cast iron, steel, etc.
S&D Drill - Heavy Duty - 3/8" Shank - 135° Pt: For portable or machine drilling in hard steels, stainless steels, and other hard materials. The split point is self centering and breaks up chips.
S&D Drill - Heavy Duty - Cobalt - 3/8" Shank - 135° Pt: For portable or machine drilling in hard steels, stainless steels, and other hard materials. The split point is self centering and breaks up chips.
SILVER AND DEMING DRILLS - METRIC
S&D Drill - Round Shank 118° Pt: For portable or machine drilling in ferrous or non-ferrous metals. Ground oxide finish flutes retain lubricants and ease chip welding when drilling cast iron, steel, etc.
S&D Drill - 3 Flat Shank 118° Pt: Flats are ground on three sides of drill shank for positive holding in 3-Jaw Chucks.
S&D Drill - Heavy Duty - 135° Split Point: For portable or machine drilling in hard steels, stainless steels, and other hard materials. The split point is self centering and breaks up chips.
S&D Drill - Heavy Duty - 3 Flat Shank - 135° Split Point: For portable or machine drilling in hard steels, stainless steels, and other hard materials. The split point is self centering and breaks up chips. Flats are ground on three sides of drill shank for positive holding in 3 Jaw Chucks.
SILVER AND DEMING DRILLS - SETS
8 Piece Drill Display - 1/2" Shank: Sizes 9/16 to 1 by 16ths.
8 Piece Drill Set - Metal Index: Sizes 9/16 to 1 by 16ths.
8 Piece Drill Set - Wood Stand: Sizes 9/16 to 1 by 16ths.
13 Piece Drill Set - Wood Stand: Sizes 7/32 to 3/4 by 32nds.; Sizes 13/16 to 1 by 16ths. & 31/32.
32 Piece Drill Set - Wood Stand: Sizes 33/64 to 1 by 64ths.
5 Piece Drill Set - Wood Stand: Sizes 1 to 1-1/2 by 8ths.
13 Piece Drill Set - Wood Stand: 13.0, 13.5, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0, 21.0, 22.0, 24.0, 25.0.
S&D Drill - Round Shank 118° Pt: For portable or machine drilling in ferrous or non-ferrous metals. Ground oxide finish flutes retain lubricants and ease chip welding when drilling cast iron, steel, etc.
S&D Drill - 3 Flat Shank 118° Pt: Flats are ground on three sides of drill shank for positive holding in 3-Jaw Chucks.
S&D Drill - Heavy Duty - 135° Split Point: For portable or machine drilling in hard steels, stainless steels, and other hard materials. The split point is self centering and breaks up chips.
S&D Drill - Heavy Duty - 3 Flat Shank - 135° Split Point: For portable or machine drilling in hard steels, stainless steels, and other hard materials. The split point is self centering and breaks up chips. Flats are ground on three sides of drill shank for positive holding in 3 Jaw Chucks.
5 Piece Drill Set - Wood Stand - 3/4" Shank: 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2.
5 Piece Drill Set - Wood Stand - 3/4" Shank: 1, 1-1/4, 1-1/2, 1-3/4, 2.
8 Piece Drill Set - Wood Stand - 3/8" Shank: 9/16 to 1 by 16ths.
8 Piece Drill Set - Drill Display - 3/8" Shank: 9/16 to 1 by 16ths.

Copyright © 1994-2008 by ICS Cutting Tools, Inc. All rights reserved. No part of this page may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic or digital recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use without written permission of the publisher.

SILVER AND DEMING DRILLS - FRACTIONAL

SILVER AND DEMING DRILLS - METRIC

SILVER AND DEMING DRILLS - SETS