spiral point tap
Spiral Point Taps are ideal for machine tapping through holes or blind holes with adequate bottom clearance. They are also called Gun Taps because they shoot the chips ahead of the tap. This also reduces loading and clogging in the flutes.
NEW!! 360° tool view
Spiral Point Taps - High Speed Steel
Spiral point taps are ideal for machine tapping through holes or blind holes with adequate bottom clearance. They are called "Gun Taps" because they shoot the chips ahead of the tap. This also reduces loading and clogging in the flutes.
Spiral Point Taps - TiN Coated
Spiral point taps are ideal for machine tapping through holes or blind holes with adequate bottom clearance. They are called "Gun Taps" because they shoot the chips ahead of the tap. This also reduces loading and clogging in the flutes.
Spiral Point Taps - Solid Carbide
Micrograin Solid Carbide Spiral Point Taps are designed for machine tapping through holes or blind holes in difficult to machine materials and tough work hardening metals, such as stainless steel, titanium alloys, Inconel, powdered metals, cast iron, plastics, and steels up to Rockwell hardness C45. Used whenever high speed steel spiral point taps cannot handle the job. Solid Carbide Spiral Point Taps have a plug chamfer and must have a rigid setup for use. Do not use for hand tapping.
Spiral Point Taps - Cobalt
Cobalt Spiral Point Taps are designed for tapping difficult applications such as heat treated steels up to 45 RC, tool steels, and other tough alloys.
Spiral Point Taps (Metric) - High Speed Steel
Spiral point taps are ideal for machine tapping through holes or blind holes with adequate bottom clearance. They are called "Gun Taps" because they shoot the chips ahead of the tap. This also reduces loading and clogging in the flutes.
Spiral Point Taps (Metric) - TiN Coated
Spiral point taps are ideal for machine tapping through holes or blind holes with adequate bottom clearance. They are called "Gun Taps" because they shoot the chips ahead of the tap. This also reduces loading and clogging in the flutes.
Spiral Point Taps - +.005 Oversize Taps
Oversize Spiral Point Taps are used primarily where a piece will be plated or heat treated after tapping. They are also used when tapping plastics or zinc alloys where it is difficult to maintain the proper tapped hole size because of abrasion or shrinkage.
Spiral Point Taps - Cobalt (CNC)
Cobalt CNC Spiral Point Taps are designed for tapping difficult applications such as heat treated steels up to 45 RC, tool steels, and other tough alloys. The were specifically developed for use on CNC equipment.
Spiral Point Taps - Screw Thread Insert
Screw Thread Insert Spiral Point Taps are oversize taps designed to produce threads that will accommodate a helical coil wire screw thread insert.
Spiral Point Extension Taps
Spiral Point Extension Taps are designed for deep hole tapping where the work requires an undercut shank to follow through hole.
Spiral Point Pulley Taps
Spiral Point Pulley Taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps. Thread length is the same length as a standard hand tap.
Spiral Point Pulley Taps - Metric
Metric Spiral Point Pulley Taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps. Thread length is the same length as a standard hand tap.